Page 91
Chapter 4: Editing Sequence
• The Notes field:
This field determines which notes will be affected. It cannot be
accessed by the cursor. It can only be changed by pressing pads or
receiving external MIDI notes. When the screen is first displayed, it
appears as shown above with the word ALL (affect all notes) and the
text (Hit pads) to the right. When a pad is pressed, the pad’s
currently assigned note number appears in the field, followed by the
pad number and currently assigned sound name. On the right side
of the line is the text ( 1 pad ) indicating that one pad is se-
lected for editing:
Notes:36/A02-SNARE_DRUM ( 1 pad )
If another pad is then pressed, its note number, pad number, and
assigned sound are displayed instead, and the text to the right
displays ( 2 pads). This continues until the user has selected all
of the pads he or she intends to edit.
• The Set notes to param field:
This choice field determines to which parameter (TUNING, AT-
TACK, DECAY, or FILTER) the selected notes’ Note Variation
parameter will be set.
• The Value field:
This field selects what value of tuning, attack, decay, or filter the
selected notes’ Note Variation data will be set to.
• The <Do it> soft key:
Pressing this key performs the edit as specified in the above fields.
To Next Page
Loading...
Need help?
General
