Page 141
Chapter 7: The MIXER/EFFECTS Key
hardware mixing consoles. It provides the advantage of
automatically changing the level to the individual out-
puts or effects whenever the stereo volume is changed.
2. NO:
The level of the Individual Outputs/Effects send is made
completely independent of the stereo volume. Changing
the stereo volume will have no effect on the Individual
Outputs/Effects volume for the same sound. This is
similar to the Pre Fader Echo Send function on hardware
mixing consoles.
The Soft Key:
• The <Set all notes> soft key:
Pressing this soft key displays the following screen, which allows
the mix data for all 64 note numbers to be set in one step:
====== Set Mix Data For All Notes ======
Parameter:INDIV OUT FOLLOW STER VOL
Set all 64 notes to:YES
========================================
<Do it>
To set a single mix parameter for all 64 note numbers:
1. Set the Parameter field to the desired mix parameter. The
options are:
STEREO VOLUME
STEREO PAN
INDIV OUT VOLUME
INDIV OUT ASSIGN
INDIV OUT FOLLOW STER VOL
2. Enter the value that you want all 64 note numbers to be set to in
the Set All 64 Notes To field.
3. Press <Do it>.
To Next Page
Loading...
Need help?
General
