Akai MPC 3000 User Manual

Chapter 1: Introduction
Page 5
• Programmable tempo changes in mid-sequence or mid-song are
supported.
• Mid-sequence time signature changes are supported.
• Auto Punch feature allows automated punch-in and/or punch-out
at preset times within the sequence.
• Two foot switch inputs allow functions such as Play/Stop and
Punch In/Out to be remotely controlled.
• Swing feature provides a useful method of adjusting the rhythmic
feel of your tracks.
• 16 velocity- and pressure-sensitive front panel drum pads and 4
pad banks provide a total of 64 pad/bank combinations.
• Note Variation feature allows a unique value of tuning, decay,
attack or filter frequency to be recorded with each drum note.
• MIDI sustain pedal messages can be specially processed so that
multiple overdubs on the same track of a sequence can use the
sustain pedal independently, without interaction.

Akai MPC 3000 Specifications

General

Polyphony	32 voices
Sampling Rate	44.1 kHz
Sampling Resolution	16-bit
Memory	2MB (expandable to 16MB)
Pads	16 velocity and pressure sensitive pads
Sequencer	Yes
Sequencer Resolution	96 PPQ
Storage	3.5" floppy disk drive
MIDI	In, Out, Thru
Display	LCD
Outputs	stereo output
Inputs	2 x 1/4" inputs