Akai MPC 3000 User Manual

Page 192
Chapter 9: Saving to and Loading from Disk
============== Copy a disk =============
Insert disk to be copied TO, then
press <Proceed>.
========================================
<Proceed>
Remove the original disk and insert the blank formatted disk, then
press <Proceed>. The bottom line will change to Writing to
destination disk. Please wait
. If all the disk data have
not been copied, the cycle of inserting the source disk, followed by
the destination disk, will be repeated until all data have been
copied.

Akai MPC 3000 Specifications

General

Polyphony	32 voices
Sampling Rate	44.1 kHz
Sampling Resolution	16-bit
Memory	2MB (expandable to 16MB)
Pads	16 velocity and pressure sensitive pads
Sequencer	Yes
Sequencer Resolution	96 PPQ
Storage	3.5" floppy disk drive
MIDI	In, Out, Thru
Display	LCD
Outputs	stereo output
Inputs	2 x 1/4" inputs