Page 4
MPC3000 Software Update Version 3.1 Operator’s Manual
2. ONE PER MIDI OUTPUT:
In this option is selected, one track is created for each channel/port
assignment in use within the MIDI file, and all events are mapped to
tracks with the same channel/port assignment, regardless of their
original track numbers. For example, if a MIDI file to be loaded con-
tains events assigned to channel/port 1A, 6D, 7B and 2C, then the
resulting sequence would contain four tracks assigned to these chan-
nel/ports, and containing the events that had the same channel/port
assignments in the MIDI file. This option will cause different tracks
containing the same channel/port assignments to be merged together,
but allows MIDI files with more than 99 tracks to be loaded.
COMMENT: If a type 0 file is selected for loading, the message “(For-
mat 0 file, will auto-map tracks)” appears in place of this field. This
indicates that, as with the ONE PER MIDI OUTPUT selection, one
track will be created for each channel/port assignment that exists in
the file’s single track.
To load the MIDI file, set the fields as desired then press <Do it>.
To Next Page
Loading...
Need help?
General
