EasyManuals Logo
Home>Akai>Recording Equipment>MPC 3000

Akai MPC 3000 User Manual

Akai MPC 3000
276 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #258 background imageLoading...
Page #258 background image
Page 6
MPC3000 Software Update Version 3.1 Operators Manual
• The Volume field:
On S1000 or S3000 hard disks or CD-ROMs, each partition may contain up to
100 volumes, in which the actual files are contained. Volumes act as directo-
ries— files are contained within volumes, and volumes are contained within
partitions. This field displays the active volume and only appears if a SCSI
disk partition, not the floppy, is selected in the Disk field. It is for display
only and cannot be edited. To change the active volume, you must press <Sel
Vol>.
• The <Sel Vol> soft key:
Pressing this soft key presents a screen that allows you to change the active
volume of the S1000/S3000 hard disk or CD-ROM. This field appears only if a
S1000 or S3000 hard disk or CD-ROM is active and one of the disk partitions
is currently selected in the Disk field above.
Other than the above changes, this screen operates as in previous system
software versions.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Akai MPC 3000 and is the answer not in the manual?

Akai MPC 3000 Specifications

General IconGeneral
BrandAkai
ModelMPC 3000
CategoryRecording Equipment
LanguageEnglish

Related product manuals