Page 18
MPC3000 Software Update Version 3.1 Operator’s Manual
Two new fields exist:
• The Save field:
Program files contain no sound data so when saving a program, the sounds
used by the program are normally also saved at the same time. This choice
field permits the option of saving the program file by itself without the accom-
panying sound files. The two options are:
1. PROGRAM+SOUNDS (NORMAL):
This is the normal setting, saving first the program file then each
sound file used within the program.
2. PROGRAM ONLY (NO SOUNDS):
This option allows only the program file to be saved without any
sounds.
• The Replace same sounds on disk field:
This field appears only if PROGRAM+SOUNDS (NORMAL) is selected in
the field above. It has two options:
1. NO (FASTER):
When saving a program (and its sounds), if a sound file exists on disk
with the same name as one of the sounds to be saved, the file is not
overwritten by the sound in memory. If when saving a program you
know that the sounds have not changed, this option will permit a
faster save.
2. YES:
When saving a program (and its sounds), if a sound file exists on disk
with the same name as one of the sounds to be saved, the disk file is
overwritten by the sound in memory. If when saving a program you
know that the sounds have changed, you should select this option.
Enhancements to the “Save all programs and sounds”
screen
In order to add the enhancements, the “Save All Programs” screen has been
enhanced. It is accessed by pressing DISK, then 5:
========== Save All Programs ==========
File name:File_name Size: 0K
Disk:SCSI DISK PART A Free:30793K
Save:APS FILE + SOUNDS (NORMAL)
Replace same sounds on disk:NO (FASTER)
========================================
<Do it> <Select disk>
To Next Page
Loading...
Need help?
General
