EasyManuals Logo

Akai MPC 3000 User Manual

Akai MPC 3000
276 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
Chapter 2: The Basics
Page 21
select which drum will play—one key for bass drum, one for snare,
one for high tom, etc.
This system of using MIDI note numbers to select drums is used in
the MPC3000’s sound assignment system. In programs (described
below), sounds are assigned directly to one of 64 MIDI note numbers
(35-98). In sequences, drum notes are also assigned to one of 64 note
numbers (35-98) to indicate which sound to play. Because of this
assignment method, there are many data fields in the MPC3000
called Note, in which you enter either the note number you wish to
assign in a program, or the note number you wish to edit in a
sequence’s drum track. (For easy visual identification in these
Note fields, the note number is accompanied by both the currently
assigned pad number and sound name. )
Program
Once a sound is loaded into memory, it cannot be played by pads or
from MIDI until it is assigned within a program. A program is a
collection of 64 sound assignments and can be thought of as a drum
set. In a program, each of 64 MIDI note numbers (35-98) is assigned
to one of the 128 possible sounds currently residing in memory. Once
assigned to a note number, a sound can be played in one of three
ways:
1. By receiving a Note On message from the MIDI input;
2. By playing a front panel drum pad (each pad is also assigned to
one of the 64 MIDI note numbers 35-98);
3. By playing drum tracks in sequences (each note event in a drum
track is assigned to one of the 64 MIDI note numbers 35-98).
In addition to the 64 sound assignments, each program also con-
tains a number of sound modifying parameters for each of the 64
sound assignments, including envelope, tuning, filter, mixer, and
velocity response data. Each program also contains some param-
eters, such as the settings of the effects generator, that collectively
affect all sounds.
The MPC3000 has 24 different programs (one of which can be active
at a time) each with its own unique set of 64 assignments. Simply by
changing the active program number (1-24), all 64 sound assign-
ments and their sound modifying settings will instantly change.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Akai MPC 3000 and is the answer not in the manual?

Akai MPC 3000 Specifications

General IconGeneral
Polyphony32 voices
Sampling Rate44.1 kHz
Sampling Resolution16-bit
Memory2MB (expandable to 16MB)
Pads16 velocity and pressure sensitive pads
SequencerYes
Sequencer Resolution96 PPQ
Storage3.5" floppy disk drive
MIDIIn, Out, Thru
DisplayLCD
Outputsstereo output
Inputs2 x 1/4" inputs

Related product manuals