Chapter 3: Recording Sequences
Page 48
2. Set the Type field to MIDI, indicating that this track will not
play the internal drum sounds.
3. Set the Chn field to 2A, indicating that track 4 will play through
MIDI channel 2 and MIDI output port A.
4. If you play the MIDI keyboard now, the synthesizer that is set to
receive on MIDI channel 2 and port A should play a piano sound.
If not, check the previous steps and your MIDI hookup.
5. Enter Record mode by holding RECORD and pressing PLAY
START.
6. Record your piano part in time to the drums, percussion and bass
parts.
7. Press STOP.
To Next Page
Loading...
Need help?
General
