Akai S3000XL User Manual

EDIT SAMPLE
Page 126 S3000XL Operator’s Manual
The soft keys along the bottom are:
This indicates you are on the sample select page. Press this to switch
between sample points and millisecond displays.
This takes to you to the TRIM page where you may edit the start and end
of a sample.
This takes you to the LOOP page where you may set loops for the
sample..
This takes you to the gain normalise page where you may set the
sample’s level to its maximum thereby getting the best signal to noise ratio
and dynamic range out of the sampler.
This takes you to the DIGITAL SIGNAL PROCESSING pages where you
may timestretch or re-sample the sample or apply EQ.
This offers a set of further editing functions where you may perform
‘sectional’ editing (that is, remove sections from samples), join, splice, mix,
tune and reverse samples and set fades.
This allows you to delete samples from memory.
We will come to these in a moment.

Akai S3000XL Specifications

General

Type	Sampler
Polyphony	32 voices
Sampling Rate	44.1 kHz
Memory	2 MB standard, expandable to 32 MB
Filter	Digital resonant low-pass filter
MIDI	In, Out, Thru
Weight	6.5 kg
Display	Backlit LCD
Storage	Floppy disk drive, SCSI for external storage
Outputs	8 individual outputs
Inputs	Stereo input
Effects	Optional EB16 effects board
Dimensions	Standard 19" 2U rackmount