LOAD
S3000XL Operator’s Manual Page 229
IMPORTING SOUNDS FROM OTHER MANUFACTURER’S CD-ROMS
On the S3000XL, as well as having access to a vast range of Akai sound library, you may
also import sounds from CD-ROMs made for certain samplers made by other
manufacturers thereby giving you access to even more sounds. This is done in the SCSI
page.
Assuming your CD-ROM is on a SCSI ID other that 5, change the SCSI ID here in the
field to match that of the CD-ROM drive you are using and press F7 or
F8 as appropriate. The following example shows loading sounds from an EXIIIP CD-ROM.
Pressing F8 will show the following screen:
To load an Akai volume (as opposed to a whole CD-ROM volume), simply move the
cursor to the volume name field and press and/or . All programs that are
contained in the volume will be loaded.
To load a single program, move the cursor to the program you wish to load and press
and/or .
To load a program and all programs that follow it, move the cursor to the program field
and select the program you want to have as the first in the list of programs you will load.
Now place it at the top of the screen by using the DATA wheel, scrolling to place it at the
top of the list shown in the right of the screen. Move the cursor to the volume field and
press and/or . This will load the program shown at the top of the list and all
those shown below it.
NOTE: If any programs below the select program are ‘off screen’, these will also be
loaded.
For example, if in the above example, you want to load BRIGHT GRAND and all programs
after it, move the cursor to BRIGHT GRAND, scroll it to the top of the list using the DATA
wheel and press and/or .
To Next Page
Loading...
Need help?
General
