LOAD
S3000XL Operator’s Manual Page 217
SELECTING THE HARD DISK VOLUME
As well as being divided into partitions, each partition is divided into volumes. The volume
is selected in the field (in the above example, it shows that the volume is not named
- see later for details on naming volumes). To select the volume, move the cursor to the
field and select using the DATA wheel.
SELECTING THE TYPE OF LOAD
The field allows you to select what it is you will load from disk (be it
floppy or hard disk). To change the type of save you wish to perform, move the cursor to
the field:
The options are:
ENTIRE VOLUME This will load the entire contents of the memory to disk.
This will include all programs, samples, the multi and
effects file (if the optional EB16 multi-effects processor is
fitted).
ALL PROGS+SAMPLES This will load all programs and samples only. The MULTI
and any effects files will be ignored and not loaded.
ALL PROGRAMS ONLY This will load all the programs in memory but will not load
the samples associated with them.
ALL SAMPLES This will load all the samples currently in memory.
CURSOR PROG+SAMPLES This will load the selected program and its associated
samples only.
CURSOR ITEM ONLY This will load the selected individual item be it a program, a
sample or a multi. If the optional EB16 effects processor is
installed, you may also load effects files. You may also
load ME-35T Drum settings and D-D SONG files (called
TL’s - take lists).
OPERATING SYSTEM This will load any operating system that may be on the
disk.
MULTI+PROGS+SAMPS This will load the selected multi plus its associated
programs and their associated samples. It will also load the
effects file (if the optional EB16 multi-effects processor is
fitted).
To Next Page
Loading...
Need help?
General
