INTRODUCTION
Page 2 S3000XL Operator’s Manual
FEATURES
• Polyphony 32 voices
• A-D Conversion 16-bit stereo with 64-times oversampling
• Internal processing 28-bit accumulation
• D-A Conversion 18-bit with 8-times oversampling
• Sampling rates 44.1kHz/22.050kHz
• Phase locked stereo sampling and playback
• Internal memory 2Mbytes standard, expandable to 32Mbytes using SIMMs
• Sampling times 2Mbytes 24 seconds mono @ 44.1kHz
32Mbytes 5.94 minutes mono @ 44.1kHz
(Halve these times for stereo sampling)
• Inputs L/Mono and R jack inputs
• Outputs L/R stereo jack outputs
8 assignable individual outputs
Stereo headphone jack output
• Display 40 x 6 character backlit LCD with graphic waveform editing.
• Digital I/O SPDIF digital audio input/output on RCA phonos.
• Effects Optional 4-channel multi-effects processor offering two
channels of simultaneous distortion, three-band EQ, ring
modulation, modulation (chorus, phase shift, flanging,
pitch shift, autopan or rotary speaker), stereo delay and
reverb plus two ‘spare’ channels of reverb (four reverb
processors in total).
• DSP Functions Timestretch, re-sampling and digital EQ.
• Filters 2-pole (12dB/Octave) resonant lowpass per voice.
Optional IB304F offers a 2nd bank of 2-pole resonant
multi-mode (HP, BP, LP, EQ) filters and tone control.
• Envelopes 1 x ADSR and 1 x multi-stage envelope generator (an
extra multi-stage envelope is added with the installation of
the IB304F).
• LFOs 2 x multi-wave low frequency oscillators (triangle, square,
sawtooth and random waves).
• Legato mode Single trigger playback to emulate old monophonic synths
and solo instruments’ playing styles.
• Portamento Polyphonic and monophonic portamento.
• Sound library Fully compatible with Akai S900, S950, S1000, S1100,
S2800, S3000, S3200, S2000 and S3200XL samplers.