EDIT PROGRAM - SINGLE
S3000XL Operator’s Manual Page 89
This allows you to tune the keygroup up or down in semitones and cents.
The range is ±50.00.
This introduces a fixed tuning offset and can be used when layering
samples to provide a chorus effect. Unlike the TUNE parameter, this offset
is constant no matter what the played pitch of the sample is. The range is
±50.
This soft key switches on or off the facility to input notes from the
keyboard. At first, with the function being so fast and convenient, it may
seem a bit strange to want to disable it but there may be times when you
need to be able to change note ranges whilst receiving data from a
sequencer that is playing. If was on permanently, in the
situation, the sequencer would completely re-program the key ranges! This
on/off function should guard against that.
To exit this page and to access other pages, press - this will give you access to
other keygroup functions - or press to return you to the main PROGRAM EDIT page
and the master program functions.
To Next Page
Loading...
