Parameter Set-up:
● Enabled: tick it to access device video or real-time screenshots through a
browser (http address such as: http://device IP:8080/video.cgi (dynamic
video), http://device IP:8080/jpeg.cgi (static screenshot) )
● Video Resolution: select video resolutions among seven options: “QCIF”,
“QVGA”,“CIF”,“VGA”,“4CIF”,“720P”. The default video resolution is “4CIF”.
and the video from the door phone might not be able to be shown in the
indoor monitor if the resolution is set higher than “4CIF”.
● Video Framerate: “30fps” is the video frame rate by default.
● Video Quality: the video bitrate, from 50 to 90.
To Next Page
Loading...
Need help?
General
