3. Select Enable to activate the automatic transfer.
Select Disable to deactivate the automatic transfer.
4. Select Apply to save the changes.
5. Click on Close to close the window.
If the console is configured to automatically transfer calls, a specific call in progress can be
transferred manually:
1. In conversation with the first party, click Auto Forward (or press the corresponding S
key on the keyboard).
2. Dial the number of the second party.
3. Trigger the dialing.
4. Present the call before pressing the key.
3.12.2 Manual Transfer without Presentation
Press the key. The two parties are in conversation and the attendant console is released.
This type of transfer can be carried out on a free or a busy set. If the set receiving the transfer
does not take the call after a certain time, this call is directed back to the attendant console.
+#'
!"# $%
39/69
To Next Page
Loading...
Need help?
General
