4.2.5 DTMF
Voice frequency/DTMF.
Also called transparent dialing, or overdialing (DTMF), this function is used to resend
additional dialing to the same party on the line.
4.2.6 Record
Records the current conversation.
To end recording, press the Record key again.
4.2.7 Rotary
Sends decimal rotary dialing to send a number to the current party.
4.2.8 Flash
Sends a calibrated pulse, also called cut-off or flashing.
This operation is used to activate a service for the recipient of a call (to another PCX or any
other flash-compatible communication system). This is used to:
- Send additional numbers
- Call back a service (a remote attendant, for example)
4.2.9 Auto Forward
Deletes automatic transfer for a specific call (see the Alcatel-Lucent 4059 Attendant Console -
Attendant console operation - Selecting the Transfer Type: Automatic or Manual).
4.2.10 Malicious
Malicious call (not available in the USA).
Indicates a malicious call, to the system administrator for an internal call, or to the telephone
operator for external calls.
Note:
For external calls to be indicated as malicious, you must have a subscription for this service with the
telephone operator.
4.3 Programmable Keys
The programmable keys can be programmed by the attendant (see the Alcatel-Lucent 4059
Attendant Console - Management from the attendant console - Programmable keys). These
keys can also be pre-programmed by the system administrator.
Note:
All keys presented here do not necessarily appear on a console. Contact the system administrator for an
Chapter
4
'' ,#
44/69
!"# $%
To Next Page
Loading...
Need help?
General
