5.9.3 Direct Seize
This window is used to authorize or refuse public network access for all sets on the system.
Click on Apply.
5.10 Changing the status of the attendant group sets or the entity
The system administrator configures the call routings for the whole system in one of four states
(night, day, Forward1, Forward2).
The attendant console is used to change:
- The status of the attendant group to which it belongs
- The status of one or more entities in the system
In the Extension menu, select Service mode (or press the F10 key). Select Status
programming.
5.10.1 Programming the attendant group status
In the Status programming option, select Group status.
1. Select one of the available options.
2. Click on Apply.
3. Click on Close to close the window.
5.10.2 Programming the entity status
In the Status programming option, select Entities status.
Chapter
5
&-. ,#. (
60/69
!"# $%
To Next Page
Loading...
Need help?
General
