Alcatel-Lucent 7210 SAS-D User Manual

7210 SAS D, E, K OS Basic System Configuration Guide Page 103
Configuration Commands
The exit all command leaves the file system/file operation context and returns to the <ROOT> CLI
context. The state of the present working directory is maintained for the CLI session. Entering the file
command returns the cursor to the working directory where the exit command was issued.
format
Syntax format cflash cflash-id
Context root>file
Description Platforms Supported: 7210 SAS-K.
This command formats the compact flash. The compact flash must be shutdown before starting the
format.
Parameters cflash-id — The compact flash type.
Values cf1:|uf1: - 7210 SAS-K
md
Syntax md file-url
Context file
Description This command creates a new directory in a file system.
Directories can only be created one level at a time.
Parameters file-url — The directory name to be created.
<local-url>|<remote-url> - [255 chars max]
local-url - [<cflash-id>/ |<usb-flash-id>/][<file-path>]
remote-url - [ftp://<login>:<pswd>@<remote-locn>/]
[<file-path>]
remote-locn - [ <hostname> | <ipv4-address> |
"["<ipv6-address>"]" ]
ipv4-address - a.b.c.d
ipv6-address - x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x - [0..FFFF]H
d - [0..255]D
interface - 32 chars max, for link
local addresses
cflash-id or usb-flash-id -
cf1: - 7210 SAS-D
cf1: | uf1: - 7210 SAS-E

Alcatel-Lucent 7210 SAS-D Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS-D
Category	Switch
Language	English