Alcatel-Lucent 7210 SAS-D User Manual

Displaying Configuration Contexts
Page 30 7210 SAS D, E, K OS Basic System Configuration Guide
Displaying Configuration Contexts
The info and info detail commands display configuration for the current level. The info
command displays non-default configurations. The info detail command displays the entire
configuration for the current level, including defaults. The following example shows the output
that displays using the
info command and the output that displays using the info detail
command.
*A:ALA>config>service>vpls# info
----------------------------------------------
stp
shutdown
exit
sap 1/1/14:100 create
exit
sap 1/1/15:100 create
exit
no shutdown
----------------------------------------------
*A:ALA>config>service>vpls# info detail
----------------------------------------------
no description
no disable-learning
no disable-aging
no discard-unknown
fdb-table-size 250
fdb-table-high-wmark 95
fdb-table-low-wmark 90
local-age 300
stp
shutdown
priority 32768
hello-time 2
forward-delay 15
max-age 20
hold-count 6
mode rstp
exit
mac-move
move-frequency 2
retry-timeout 10
shutdown
exit
sap 1/1/14:100 create
no description
no tod-suite
limit-mac-move blockable
no disable-aging
no max-nbr-mac-addr
no discard-unknown-source
no mac-pinning
stp
path-cost 10
priority 128
no edge-port
auto-edge

Alcatel-Lucent 7210 SAS-D Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS-D
Category	Switch
Language	English