Alcatel-Lucent 7210 SAS-D - Time Range Commands

Date and Time Commands
Page 352 7210 SAS D, E, K OS Basic System Configuration
Guide
Time Range Commands
time-range
Syntax [no] time-range name [create]
Context config>cron
Description This command configures a time range.
The no form of the command removes the name from the configuration.
Default none
Parameters name — Configures a name for the time range up to 32 characters in length.
absolute
Syntax absolute start start-absolute-time end end-absolute-time
no absolute start absolute-time
Context config>cron>time-range
Description This command configures an absolute time interval that will not repeat.
The no form of the command removes the absolute time range from the configuration.
Parameters start absolute-time — Specifies starting parameters for the absolute time-range.
Values absolute-time: year/month/day,hh:mm
year: 2005 — 2099
month: 1 — 12
day: 1 — 31
hh: 0 — 23
mm: [ 0 — 59
end absolute-time — Specifies end parameters for the absolute time-range.
Values absolute-time: year/month/day,hh:mm
year: 2005 — 2099
month: 1 — 12
day: 1 — 31
hh: 0 — 23
mm: [ 0 — 59