File System Management
7210 SAS D, E, K OS Basic System Configuration Guide Page 85
Volume in drive cf1 on slot A is formatted as FAT32.
Directory of cf1:\
10/12/2011 10:37p 4248394 boot.tim
10/17/2011 07:28a 524 sasm.sdx
10/26/2011 10:06p 828 bof.cfg
10/27/2011 09:04p <DIR> act-collect
10/27/2011 09:06p <DIR> act
10/17/2011 07:30a 0 test1.txt
10/26/2011 10:43p 5360 sasm.cfg
10/11/2011 06:42a 28821599 both.tim
10/26/2011 10:42p 14597 bootlog.txt
10/19/2011 04:22a 832 bof.cfg.1
10/17/2011 07:37a 827 test1
10/17/2011 07:38a 827 tes2
10/17/2011 07:38a 827 tes3
10/17/2011 07:39a 827 tes3567
10/17/2011 07:38a 827 tes356
10/18/2011 10:46p 5481 sasm.cfg.1
14 File(s) 33117369 bytes.
2 Dir(s) 80470016 bytes free.
*A:7210-SAS #
In the above example, the total of files and directories is 14 files + 2 directories = 16.
USB Storage Device
Note: USB devices are not supported on 7210 SAS-D devices.
7210 SAS platform support USB interface which provides storage functionality. It allows the use
of USB sticks providing them an alternate storage location with larger capacity than the internal
flash.
The USB storage device can be used to store Timos images, configuration files, accounting
records, and log files. The BOF file can point to images on USB and be used to load Timos images
and configuration files.
7210 SAS-K provide an option to load the bootloader (boot.tim) from the USB storage device
plugged into any one of the USB ports. This option is not available on 7210 SAS-E.
NOTE:
• The list of USB devices and the capacities that is supported for use with 7210 SAS are
listed in the 7210 SAS OS Software Release Notes.
• When an USB device is unplugged or removed from the system a major alarm is raised.
The alarm can be cleared using the shutdown command.
To Next Page
Loading...
Need help?
General
