Alcatel-Lucent 7210 SAS-D User Manual

Boot Option Files
7210 SAS D, E, K OS Basic System Configuration Guide Page 151
Saving a Configuration to a Different Filename
Save the current configuration with a unique filename to have additional backup copies and to edit
parameters with a text editor. You can save your current configuration to an ASCII file.
Use either of the following CLI syntax to save a configuration to a different location:
CLI Syntax: bof# save [cflash-id]
Example
: A:ALA-1# bof
A:ALA-1>bof# save cf1:
A:ALA-1>bof#
or
CLI Syntax: admin# save [file-url] [detail] [index]
Example
: A:ALA-1>admin# save cf1:\testABC.cfg
Saving config.# Saved to cf1:\testABC.cfg
... complete
A:ALA-1#
Rebooting
When an admin>reboot command is issued, the system reboots. Changes are lost unless the
configuration is saved. Use the
admin>save file-url command to save the current configuration.
The user is prompted to confirm the reboot operation.If the now option is not specified, the user is
prompted to confirm the reboot operation.Use the following CLI syntax to reboot:
CLI Syntax: admin# reboot [auto-init][now]
Example
: A:ALA-1>admin# reboot
A:DutA>admin# reboot
Are you sure you want to reboot (y/n)? y
Resetting...OK
Alcatel-Lucent 7210 Boot ROM. Copyright 2000-2009 Alcatel-Lucent.
All rights reserved. All use is subject to applicable license agreements.
Running POST tests from ROM
Testing ROM load area...done
Relocating code...Jumping to RAM
...

Alcatel-Lucent 7210 SAS-D Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS-D
Category	Switch
Language	English