File Management Commands
Page 162 7210 SAS D, E, K OS Basic System Configuration
secondary-config
Syntax secondary-config file-url
no secondary-config
Context bof
Description This command specifies the name and location of the secondary configuration file.
The system attempts to use the configuration as specified in secondary-config if the primary config
cannot be located. If the secondary-config file cannot be located, the system attempts to obtain the
configuration from the location specified in the tertiary-config.
Note that if an error in the configuration file is encountered, the boot process aborts.
The no form of the command removes the secondary-config configuration.
Default none
Parameters file-url — The secondary configuration file location, expressed as a file URL.
Values file-url [local-url | remote-url] (up to 180 characters)
local-url [<cflash-id/> | <usb-flash-id>][file-path]
remote-url [{ftp://|tftp://} login:pswd@remote-locn/][file-path]
cflash-id cf1:
usb-flash-id uf1:
secondary-image
Syntax secondary-image file-url
no secondary-image
Context bof
Description This command specifies the secondary directory location for runtime image file loading.
The system attempts to load all runtime image files configured in the primary-image first. If this
fails, the system attempts to load the runtime images from the location configured in the secondary-
image. If the secondary image load fails, the tertiary image specified in tertiary-image is used.
The no form of the command removes the secondary-image configuration.
Default none
Parameters file-url — The file-url can be either local (this local flash) or a remote FTP server.
Values file-url [local-url | remote-url] (up to 180 characters)
local-url [<cflash-id/> | <usb-flash-id>][file-path]
remote-url [{ftp://|tftp://} login:pswd@remote-locn/][file-path]
cflash-id cf1:
usb-flash-id uf1:
To Next Page
Loading...
