Alcatel-Lucent 7210 SAS-D - Page 175

Boot Option Files
7210 SAS D, E, K OS Basic System Configuration Guide Page 175
primary-image ftp://*:*@10.135.16.90/./images/auto-boot/solution/bothx.tim
secondary-image ftp://*:*@10.135.16.90/./images/auto-boot/solution/bothx.tim
tertiary-image ftp://*:*@10.135.16.90/./images/auto-boot/solution/both.tim
primary-dns 135.254.244.204
dns-domain in.lucent.com
ping 10.135.16.90
#uplinkA Port Settings:
uplinkA-port 1/1/1
uplinkA-address 192.168.1.11/24
uplinkA-vlan 0
uplinkA-route 10.135.0.0/16 next-hop 192.168.1.1
#uplinkB Port Settings:
uplinkB-port 1/1/2
uplinkB-address 0
uplinkB-vlan 0
#System Settings:
wait 3
persist on
console-speed 115200
no console-disabled
===============================================================================
*A:ALA#
*A:ALA# show bof booted
===============================================================================
System booted with BOF
===============================================================================
primary-image ftp://*:*@10.135.16.90/./images/auto-boot/solution/bothx.tim
secondary-image ftp://*:*@10.135.16.90/./images/auto-boot/solution/bothx.tim
tertiary-image ftp://*:*@10.135.16.90/./images/auto-boot/solution/both.tim
primary-dns 135.254.244.204
dns-domain in.lucent.com
ping-address 10.135.16.90
#uplinkA Port Settings:
uplinkA-port 1/1/1
uplinkA-address 192.168.1.11/24
uplinkA-vlan 0
uplinkA-route 10.135.0.0/16 next-hop 192.168.1.1
#uplinkB Port Settings:
uplinkB-port 1/1/2
uplinkB-address 0
uplinkB-vlan 0
#System Settings:
wait 3
persist on
console-speed 115200
no console-disabled
===============================================================================
*A:ALA#