System Management
7210 SAS D, E, K OS Basic System Configuration Guide Page 235
Location
Use the
location
command to specify the system location of the device. For example, enter the
city, building address, floor, room number, etc., where the router is located.
Use the following CLI syntax to configure the location:
CLI Syntax: config>system
location location
Example
:
config>system# location “Bldg.1-floor 2-Room 201”
CLLI Code
The Common Language Location Code (CLLI code) is an 11-character standardized geographic
identifier that is used to uniquely identify the geographic location of a router.
Use the following CLI command syntax to define the CLLI code:
CLI Syntax: config>system
clli-code
clli-code
Example
:
config>system# clli-code abcdefg1234
To Next Page
Loading...
