System Management
7210 SAS D, E, K OS Basic System Configuration Guide Page 313
shutdown
Syntax [no] shutdown
Context config> system> vwm-shelf>card
Description Platforms Supported: 7210 SAS-E.
This CLI command allows the user to administratively disable the management of a specific module
inserted in a slot on the clip-on device. When this command is executed, the 7210 SAS software
clears all pending events/traps/alarms/LED related to this card.
The no form of the command allows the user to administratively enable the management of the card
on the clip-on device. The software raises appropriate events/traps/alarms for the card.
Default no shutdown
1830VWM Manual Filter 2CH (AX Var) SFD2L
1830VWM Manual Filter 2CH (AY Var) SFD2M
1830VWM Manual Filter 2CH (AZ Var) SFD2N
1830VWM Manual Filter 2CH (BAVar) SFD2O
1830VWM Manual Filter 2CH (BB Var) SFD2P
1830VWM Manual Filter 2CH (BC Var) SFD2Q
1830VWM Manual Filter 2CH (BD Var) SFD2R
Amplifier Modules
1830 VWM Fixed Gain Ampl (AAVar) EALPFG
Module Description Acronym
To Next Page
Loading...
