Alcatel-Lucent 7210 SAS-D User Manual

Date and Time Commands
Page 346 7210 SAS D, E, K OS Basic System Configuration
Guide
cflash-id: cf1:
usb-flash-id uf1:
script
Syntax [no] script script-name [owner owner-name]
Context config>cron>action
Description This command creates action parameters for a script including the maximum amount of time to keep
the results from a script run, the maximum amount of time a script may run, the maximum number of
script runs to store and the location to store the results.
The no form of this command removes the script parameters from the configuration.
Default none — No server-address is configured.
Parameters script script-name — The script command in the action context connects and event to the script
which will run when the event is triggered.
owner owner-name — Owner name of the schedule.
Default TiMOS CLI
The no form of this command removes the script entry from the action context.
schedule
Syntax [no] schedule schedule-name [owner owner-name]
Context config>cron
Description This command configures the type of schedule to run, including one-time only (oneshot), periodic or
calendar-based runs. All runs are determined by month, day of month or weekday, hour, minute and
interval (seconds).
The no form of the command removes the context from the configuration.
Default none
Parameters schedule-name — Name of the schedule.
owner owner-name — Owner name of the schedule.
count

Alcatel-Lucent 7210 SAS-D Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS-D
Category	Switch
Language	English