Alcatel-Lucent 7210 SAS-D - Page 373

System Management
7210 SAS D, E, K OS Basic System Configuration Guide Page 373
file-url — The file URL location to save the binary file.
file url: local-url | remote-url: 255 chars max
local-url: [<cflash-id>/ | <usb-flash-id>][file-path], 200 chars max,
including the cflash-id directory length, 99 chars max each
remote-url: [{ftp://} login:pswd@remote-locn/][file-path]
remote-locn [ hostname | ipv4-address]
ipv4-address a.b.c.d
255 chars max, directory length 99 chars max each
cflash-id: cf1:
usb-flash-id uf1:
update-golden-bootstrap
Syntax update-golden-bootstrap [file-url]
Context admin
Description Platforms Supported: 7210 SAS-D and 7210 SAS-E.
This command updates the golden bootstrap image with the file-url, after validating it as a bootstrap
image for the 7210 SAS platforms.Only on 7210 SAS-D newer platforms, the admin>update-
golden-bootstrap CLI command does not update the golden-bootstrap image with the boot.tim
specified in the parameter value, if the boot.tim is not a newer image.
Default cf1:/boot.tim
Parameters file-url — Specifies the file URL.
Values file-url: local-url: 255 characters max
local-url: [cflash-id/][file-path]
cflash-id: cf1: