Alcatel-Lucent 7210 SAS-D - Page 379

System Management
7210 SAS D, E, K OS Basic System Configuration Guide Page 379
tx-hold-multiplier
Syntax tx-hold-multiplier multiplier
no tx-hold-multiplier
Context config>system>lldp
Description This command configures the multiplier of the tx-interval.
Parameters multiplier — Specifies the multiplier of the tx-interval.
Values 2 — 10
Default 4
tx-interval
Syntax tx-interval interval
no tx-interval
Context config>system>lldp
Description This command configures the LLDP transmit interval time.
Parameters interval — Specifies the LLDP transmit interval time.
Values 1 — 100
Default 5