Alcatel-Lucent 7210 SAS-D User Manual

System Resource-Profile Commands
Page 382 7210 SAS D, E, K OS Basic System Configuration
Guide
System Resource-Profile Commands
resource-profile
Syntax resource-profile
no resource-profile
Context configure>system
Description This command enables the context to configure resource-profile parameters on the system.
Default no default
egress-internal-tcam
Syntax egress-internal-tcam
Context configure>system>resource-profile
Description This command provides the context to allocate resources from the egress internal TCAM pool.
acl-sap-egress
Syntax [no] acl-sap-egress
Context configure>system>resource-profile>egress-internal-tcam
Description This command allows the user to allocate maximum resources for use by egress filter policies using
any of the supported match criteria. This command limits the total amount of chunks allocated for use
by egress filter policies to the value specified by num-resources. In other words, the cumulative sum
of chunks allocated to different match criteria supported by filter policies cannot exceed the value
configured with num-resources.
NOTE: The resources in the egress-internal-tcam resource pool are shared with other features (For
example: egress ACLs). To assign resources to this feature, resources may be to reallocated from
other features by disabling the policies association with a SAP, and others. (For example: to free
resources used by egress filter, the egress filter policy association command configured under a SAP
needs to be removed).
NOTE: On 7210 SAS-K, when resources are allocated to egress ACLs from the egress internal tcam
pool, these resources can be used by either MAC criteria entries, IPv4 entries and entries that use only
IPv6 64-bit addresses.

Alcatel-Lucent 7210 SAS-D Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS-D
Category	Switch
Language	English