Alcatel-Lucent 7210 SAS-D User Manual

System Management
7210 SAS D, E, K OS Basic System Configuration Guide Page 443
Sample output for 7210 SAS-E:
*A:7210-SAS># show system sync-if-timing
===============================================================================
System Interface Timing Operational Info
===============================================================================
System Status CPM A : Master Locked
Reference Input Mode : Non-revertive
Quality Level Selection : Disabled
System Quality Level : unknown
Reference Order : ref1 ref2
Reference Input 1
Admin Status : up
Rx Quality Level : unknown
Quality Level Override : none
Qualified For Use : Yes
Selected For Use : Yes
Source Port : 1/1/4
Reference Input 2
Admin Status : up
Rx Quality Level : unknown
Quality Level Override : none
Qualified For Use : Yes
Selected For Use : No
Not Selected Due To : on standby
Source Port : 1/1/6
===============================================================================
*A:7210-SAS>#
Sample output for 7210 SAS-D:
*7210-SASD># show system sync-if-timing
===============================================================================
System Interface Timing Operational Info
===============================================================================
System Status CPM A : Master Locked
Reference Input Mode : Revertive
Quality Level Selection : Enabled
System Quality Level : prc
Reference Order : ref1 ref2
Reference Input 1
Admin Status : up
Rx Quality Level : prc
Quality Level Override : none
Qualified For Use : Yes
Selected For Use : Yes
Source Port : 1/1/3
Reference Input 2

Alcatel-Lucent 7210 SAS-D Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS-D
Category	Switch
Language	English