Alcatel-Lucent 7210 SAS-D User Manual

System Commands
Page 446 7210 SAS D, E, K OS Basic System Configuration Guide
Sample Output
Note: This CLI output is obtained only if the hardware supports “DC source failure detection”.
A:7210-SAS-E> show chassis
===============================================================================
Chassis Information
Manufacture date
The chassis manufacture date. Not user modifiable.
Manufacturing
string
Factory-inputted manufacturing text string. Not user modifiable.
Time of last
boot
The date and time the most recent boot occurred.
Current alarm
state
Displays the alarm conditions for the specific board.
Number of fan
trays
The total number of fan trays installed in this chassis.
Number of fans
The total number of fans installed in this chassis.
Operational sta-
tus
Current status of the fan tray.
Fan speed
Half speed — The fans are operating at half speed.
Full speed — The fans are operating at full speed.
Number of power
supplies
The number of power supplies installed in the chassis.
Power supply
number
The ID for each power supply installed in the chassis.
AC power
Within range — AC voltage is within range.
Out of range — AC voltage is out of range.
DC power
Within range — DC voltage is within range.
Out of range — DC voltage is out of range.
Over temp
Within range — The current temperature is within the acceptable
range.
Out of range — The current temperature is above the acceptable
range.
Status
Up — The specified power supply is up.
Down — The specified power supply is down.
Label Description (Continued)

Alcatel-Lucent 7210 SAS-D Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS-D
Category	Switch
Language	English