Alcatel-Lucent 7210 SAS-D User Manual

System Commands
Page 454 7210 SAS D, E, K OS Basic System Configuration Guide
Syntax [no] router router-name interface ip-int-name
Context debug>system
Description This command enables and configures debugging for NTP.
The no form of the command disables debugging for NTP.
Parameters router-name — Base
Default Base
ip-int-name — maximum 32 characters; must begin with a letter. If the string contains special
characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.

Alcatel-Lucent 7210 SAS-D Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS-D
Category	Switch
Language	English