System Management
7210 SAS D, E, K OS Basic System Configuration Guide Page 457
F
AN
C
ONTROLLER
DEBUG
COMMANDS
fan-stats
Syntax fan-stats
Context tools>dump
Description
This command provides details of the fan operation.
Sample Output
The following table describes fan-stats output fields.
A:7210SAS# tools dump system fan-stats
Fan Configuration Mode : Auto
Fan Status : Off
Auto Mode Duration : 70 hr:24 min
Fan ON Count : 2
________________________________________________________________________________
NOTE: When the fan mode is changed by the user, the values displayed above are automatically reset
by the software.
________________________________________________________________________________
Label Description
Fan Configuration Mode
Displays the user configured mode for fan operation. It
can be On/Off/Auto.
Fan Status
Displays the current status of the fan. It can be On / Off.
Auto Mode Duration
Displays the total duration since the fan has been in
auto mode.
Displayed in HH:MM format to indicate hours and
minutes. Valid only when the Fan configuration mode
is auto.
Fan ON count
Displays the total number of times the Fan has been
switched 'ON' in auto mode. Valid only in auto mode.
To Next Page
Loading...
