7210 SAS D, E, K OS Basic System Configuration Guide Page 97
Configuration Commands
Configuration Commands
File System Commands
shutdown
Syntax [no] shutdown [cflash-id]
Context file
Description This command is available for use only with removable storage drives. The removable storage drives
differ among the 7210 SAS platforms. It cannot be used with the internal non-removable compact
flash. See the values below to know list of removable flash devices per 7210 SAS platform.
Use the no shutdown [cflash-id] command to enable the drive.
Default no shutdown — compact flash device administratively enabled.
Parameters cflash-id — Enter the device identifier (see the values below for each platform) to be shut down or
enabled. When a specific cflash-id is specified, then that drive is shutdown.
Default None
cf1:|cf2:|uf1:
Values uf1: - 7210 SAS-E
None - 7210 SAS-D (In other words, this command is not supported on 7210 SAS-
D)
cf1: | uf1: - 7210 SAS-K
To Next Page
Loading...
Need help?
General
