Root Commands
7750 SR OS Basic System Configuration Guide Page 125
-------------------------------------------------------------------------------
I. Fwd. Pkts. : 0 I. Dro. Pkts. : 0
E. Fwd. Pkts. : 0 E. Fwd. Octets : 0
===============================================================================
A:ALA-12#
vrrp
Syntax vrrp
Context monitor>router
Description This command enables the context to configure criteria to monitor VRRP statistical information for a
VRRP enabled on a specific interface.
instance
Syntax instance interface interface-name vr-id virtual-router-id [interval seconds] [repeat repeat]
[absolute | rate]
Context monitor>router>vrrp
Description Monitor statistics for a VRRP instance.
Parameters interface-name — The name of the existing IP interface on which VRRP is configured.
vr-id virtual-router-id — The virtual router ID for the existing IP interface, expressed as a decimal
integer.
interval seconds — Configures the interval for each display in seconds.
Default 5 seconds
Values 3 — 60
repeat repeat — Configures how many times the command is repeated.
Default 10
Values 1 — 999
absolute — When the absolute keyword is specified, the raw statistics are displayed, without
processing. No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead
of the delta.