System Management
7750 SR OS Basic System Configuration Guide Page 405
tx-hold-multiplier
Syntax tx-hold-multiplier multiplier
no tx-hold-multiplier
Context config>system>lldp
Description This command configures the multiplier of the tx-interval.
Parameters multiplier — Specifies the multiplier of the tx-interval.
Values 2 — 10
Default 4
tx-interval
Syntax tx-interval interval
no tx-interval
Context config>system>lldp
Description This command configures the LLDP transmit interval time.
Parameters interval — Specifies the LLDP transmit interval time.
Values 1 — 100
Default 5