Alcatel-Lucent ALE M3 - Page 185

ALE M3-M5-M7-M8 DeskPhones Administrator Guide
185
Permitted
Values
Take;Reject;End;Empty
String within 511 characters
Default
M3/M5/M7:Empty;Take;Reject;End
M8: Take;Empty;Empty;Reject;End
Web UI
Settings → Softkey Layout → Call States
Parameter
SettingCustomSoftkeyConversation
config.xml
Description
It configures custom Softkey in the Conversation state.
Note: It works only if “SettingCustomSoftkeyEnable” is set to true (Enabled).
Permitted
Values
Hold;Transfer;Conference;End;Swap;Empty
String within 511 characters
Default
M3/M5/M7: Hold;Transfer;Conference;End
M8: Hold;Empty;Transfer;Conference;End
Web UI
Settings → Softkey Layout → Call States
Parameter
SettingCustomSoftkeyHold
config.xml
Description
It configures custom Softkey in the Hold state.
Note: It works only if “SettingCustomSoftkeyEnable” is set to true (Enabled).
Permitted
Values
NewCall;Transfer;Resume;End;Empty
String within 511 characters
Default
M3/M5/M7: NewCall;Transfer;Resume;End
M8: New Call;Empty;Transfer;Resume;End
Web UI
Settings → Softkey Layout → Call States
Parameter
SettingCustomSoftkeyHeld
config.xml
Description
It configures custom Softkey in the Held state.
Note: It works only if “SettingCustomSoftkeyEnable” is set to true (Enabled).
Permitted
Values
End;Empty
String within 511 characters
Default
M3/M5/M7: Empty;Empty;Empty;End
M8: Empty;Empty;Empty;Empty;End
Web UI
Settings → Softkey Layout → Call States
Parameter
SettingCustomSoftkeyConf
config.xml
Description
It configures custom Softkey in the Conf state.
Note: It works only if “SettingCustomSoftkeyEnable” is set to true (Enabled).
Permitted
Values
Conference;Manage;Hold;Split;End;Transfer;Empty
String within 511 characters
Default
M3/M5/M7: Conference;Manage;Hold;Split;End
M8: Conference;Transfer;Manage;Hold;Split;End
Web UI
Settings → Softkey Layout → Call States