Alcatel-Lucent ALE M3 - Page 186

ALE M3-M5-M7-M8 DeskPhones Administrator Guide
186
Parameter
SettingCustomSoftkeyConfHold
config.xml
Description
It configures custom Softkey in the Hold state
Note: It works only if “SettingCustomSoftkeyEnable” is set to true (Enabled).
Permitted
Values
NewCall;Resume;Split;End;Empty
String within 511 characters
Default
M3/M5/M7: NewCall;Resume;Split;End
M8: New Call;Empty;Resume;Split;End
Web UI
Settings → Softkey Layout → Call States
Parameter
SettingCustomSoftkeyBeTrans
config.xml
Description
It configures custom Softkey in the BeTrans state.
Note: It works only if “SettingCustomSoftkeyEnable” is set to true (Enabled).
Permitted
Values
End;Empty
String within 511 characters
Default
M3/M5/M7: Empty;Empty;Empty;End
M8: Empty;Empty;Empty;Empty;End
Web UI
Settings → Softkey Layout → Call States
Parameter
SettingCustomSoftkeyPaging
config.xml
Description
It configures custom Softkey in the Paging state.
Note: It works only if “SettingCustomSoftkeyEnable” is set to true (Enabled).
Permitted
Values
Hold;End;Empty
String within 511 characters
Default
M3/M5/M7: Hold;Empty;Empty;End
M8: Hold;Empty;Empty;Empty;End
Web UI
Settings → Softkey Layout → Call States
Parameter
SettingCustomSoftkeyListening
config.xml
Description
It configures custom Softkey in the paging Listening state.
Note: It works only if “SettingCustomSoftkeyEnable” is set to true (Enabled).
Permitted
Values
Hold;End;Empty
String within 511 characters
Default
M3/M5/M7: Hold;Empty;Empty;End
M8: Hold;Empty;Empty;Empty;End
Web UI
Settings → Softkey Layout → Call States
11.16.4 Example: Setting the Soft Keys Layout in Talking State
The following example shows the configuration for setting the soft key layout in the talking state.
Customize a softkey layout file “Talking.xml” and place this file on the provisioning server
“http://10.11.5.140”.