Alcatel-Lucent ALE M3 - Page 197

ALE M3-M5-M7-M8 DeskPhones Administrator Guide
197
12.4.1 Intercom Key Configuration via Web UI
12.4.2 Outgoing Intercom Configuration via Phone UI
Long press a program key more than 2s, select the Key Type as Intercom, and then fill in the corresponding
settings.
12.4.3 Outgoing Intercom Configuration Parameters
The following table lists the parameters you can use to configure intercom for outgoing call.
Parameter
ProgramKeyXType
config.xml
Description
It configures the programmable key type. X can be number 1~20 for M3 or 1~28 for
M5/M7 and 1~36 for M8.
Permitted
Values
21 - Intercom
Default
0
Phone UI
Select one program key, then long press it for 2s, and select Key Type as Intercom.
Web UI
Phone Keys → Program Key
Parameter
ProgramKeyXAccount
config.xml