ALE M3-M5-M7-M8 DeskPhones Administrator Guide
It configures the account index of program key. X can be number 1~20 for M3 or 1~28
for M5/M7 and 1~36 for M8.
1~8
Note: For M8, the permitted values can be 1~20.
Select one program key, then long press it for 2s, and select the account intended to use
intercom.
It configures the programmable key label. X can be number 1~20 for M3 or 1~28 for
M5/M7 and 1~36 for M8.
Select one program key, long press it for 2s, and then input label name.
It configures program key number. X can be number 1~20 for M3 or 1~28 for M5/M7 and
1~36 for M8.
Select one program key, then long press it for 2s, and input the outgoing call number for
this program key.
12.4.4 Incoming Intercom Configuration via Phone UI
You can configure incoming intercom via the Phone UI path Menu → Features → Intercom by selecting one
account and entering the intercom setting.
To Next Page
Loading...
