Alcatel-Lucent ALE M3 - Page 199

ALE M3-M5-M7-M8 DeskPhones Administrator Guide
199
12.4.5 Incoming Intercom Configuration via Web UI
You can configure incoming intercom via the Web UI path: Features → Intercom.
12.4.6 Incoming Intercom Configuration Parameters
The following table lists the parameters you can use to configure intercom for an incoming call.
Note: X means account ID and it can be number 1~8 for M3/M5/M7, 1-20 for M8.
Parameter
AccountXIntercomEnable
config.xml
Description
If it is set to true, the phone may auto answer an incoming call if requested by SIPUA
layer.
Permitted
Values
false - disable
true - enable
Default
true
Phone UI
Menu → Feature → Intercom
Web UI
Features → Intercom → Enable Intercom
Parameter
AccountXIntercomMuteEnable
config.xml
Description
It enables or disables when the phone auto answers an intercom call. It will mute.
Permitted
Values
false - disable
true - enable
Default
false
Phone UI
Menu → Features → Intercom
Web UI
Features → Intercom → Intercom Mute
Parameter
AccountXIntercomToneEnable
config.xml