Alcatel-Lucent ALE M3 - Page 47

ALE M3-M5-M7-M8 DeskPhones Administrator Guide
47
and writable for higher access levels. 0 means the configuration item is writable for X1 and higher access
levels. 3 means the configuration item is read-only for X1 and higher access levels.
The following table lists the possible values of X1X2 and the configuration results with different access
levels: (W: writable; R: read only; N: hidden)
Value
admin
var
user
0
WR
WR
WR
1
WR
WR
N
2
WR
N
N
3
N
N
N
00
WR
WR
WR
01
WR
WR
R
02
WR
R
R
03
R
R
R
10
WR
WR
N
11
WR
WR
N
12
WR
R
N
13
R
R
N
20
WR
N
N
21
WR
N
N
22
WR
N
N
23
R
N
N
30/31/32/33
N
N
N
Note: The phone user interface currently does not support read-only (R), only writable-read (WR) or hidden
(N).
Customizing UserAccessPermission.xml
You can contact you interface person of Alcatel-Lucent Enterprise for the template file
“UserAccessPermission.xml”.
Web User Interface
The following parameters show the configuration for the web user interface in the UserAccessPermission.xml
file for reference.
Note: If you change the web user interface permission parameters, the IP phone will reboot to make the
changes took effect.
Example: Configuration items in the UserAccessPermission.xml for navigation bar settings of the Features
for web user interface:
<?xml version="1.0" encoding="UTF-8" ?>
<settings>
<setting id="WBMFeatureGeneral" value="0" override="true"/>
<setting id="WBMFeatureForward" value="0" override="true"/>