Alienware Area-51m - Removing the Computer Base

Identifier GUID-9688293F-8D74-48E4-A8DD-4696624BAD12
Status Translated
卸下计算机基座
警告: 拆装计算机内部组件之前，请阅读计算机附带的安全信息，并遵循拆装计算机内部组件之前中的步骤。拆装计算机
内部组件之后，请遵循 拆装计算机内部组件之后中的说明。有关其他最佳安全操作信息，请参阅 www.dell.com/
regulatory_compliance 上的 Regulatory Compliance（管制标准）主页。
Identifier GUID-B1C7ECFD-E703-4A0C-8D68-FA48D35100CB
Status In Translation
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Remove the wireless card.
4 Remove the solid-state drive (in SSD1 slot).
5 Remove the rear-I/O cover.
Identifier GUID-FD0067C1-D950-4927-9AFE-39BA0CC77330
Status In Translation
Procedure
1 Using the pull tab, disconnect the hard-drive cable.
2 Remove the hard-drive cable from the routing guides on the computer base.
3 Disconnect the tobii cable from the system board.
4 Remove the antenna cables from the routing guides on the computer base.
5 Peel o the tobii cable from the system board.
6 Remove the screw (M2x3) that secures the display-cable bracket on the system board.
7 Lift the display-cable bracket o the system board.
8 Using the pull tab, disconnect the display cable from the system board.
9 Disconnect the camera cable from the system board.
66