Publication 1734-UM002C-EN-P - July 2003
2 Index
communicating with I/O modules 2-22
image table mapping 2-20
mapping data 2-18
overview of the process 2-19
configuration
adding I/O modules to your network 4-3
adding the adapter to your network 4-2
adding the scanner to your network 4-2
configuring the adapter for DeviceNet
4-1
configuring the adapter for PointBus 2-4
going online 4-8, 5-6
RSNetWorx for DeviceNet 1-3,
Preface-4
setting the adapter’s parameters 4-3
setting the scanner’s parameters 4-3
using EDS files 4-5
connections
to and from the adapter 2-9
contents of manual Preface-2
ControlFlash Preface-3, 2-8
conventions used in manual Preface-6
COS connection produce size 2-14
cyclic 2-6, 2-22
cycling I/O mapping 2-15
cycling node status 2-14
D
data collection
on PointBus 2-7
data maps
1734-232ASC D-13
1734-IA2 D-2
1734-IB2 D-2
1734-IB4 D-2
1734-IE2C D-6
1734-IE2V D-7
1734-IJ D-9
1734-IK D-9
1734-IM2 D-10
1734-IR2 D-10
1734-IT2I D-11
1734-IV2 D-3
1734-IV4 D-3
1734-OA2 D-3
1734-OB2E D-4
1734-OB2EP D-4
1734-OB4E D-4, D-5
1734-OE2C D-8
1734-OE2V D-8
1734-OV2E D-5
1734-OV4E D-5
1734-OW2 D-6, D-12
1734-OX2 D-6
1734-SSI D-12
1734-VHSC24 D-11
1734-VHSC5 D-12
default D-1
data tables
faulted node table 2-23
idle node table 2-23
data tablesnode status table 2-23
default data maps D-1
DeviceNet Communications
Change of state 5-5
Polled 2-6
Strobe 2-6
DeviceNet communications
backplane autobaud 2-12
backplane baudrate 2-10
change of state 2-6, 2-22
cyclic 2-6, 2-22
polled 2-6, 2-22
strobe 2-6, 2-22
DeviceNet network 2-2, 5-6
diagnositc tables 2-23
documentation
for other POINT I/O products Preface-5
documentation related to POINT I/O
products
Preface-5
E
EDS Files 5-5
expansion power unit (1734-EP24DC) 2-8
expected packet rate 2-17
setting in RSNetWorx for DeviceNet 4-5
F
faulted node table 2-23
firmware
upgrading in the field 2-8
foreground to background poll ratio 2-17
setting in RSNetWorx for DeviceNet 4-5
G
going online 4-8, 5-6
guidelines for using the adapter
Preface-5
guidelines on how to use 1734-ADNX C-1