Rockwell Automation Publication 1756-UM022D-EN-P - May 2017 37
Install the Controller Chapter 2
Before the firmware update begins, this dialog box appears. Take the
required action for your application. In this example, the upgrade
continues when you click OK.
A progress dialog box indicates the progress of the firmware upgrade.
When the upgrade is complete, the Update Status dialog box indicates
that the upgrade is complete.
10. Click OK.
11. Close ControlFLASH software.
WARNING: Let the firmware update to fully complete before cycling power
or otherwise interrupting the upgrade.
TIP If the ControlFLASH upgrade of the controller is interrupted, the controllers
revert to boot firmware, that is firmware revision 1.xxx.
To Next Page
Loading...
