Rockwell Automation Publication IASIMP-QS035B-EN-P - April 2015 25
Prepare the Kinetix 5500 Drive Hardware Chapter 1
Motor Power Connections
Table 8 - Motor Power (MP) Connector Specifications
Motor Cable
Shield Clamp
Motor Power (MP) Connector Plug
Kinetix 5500 Servo Drive
(front view)
ATTENTION: Make sure that the motor power connections are correct when wiring the MP connector plug and that the plug is fully
engaged in the module connector. Incorrect wiring/polarity or loose wiring can cause an explosion or damage to equipment.
Drive Cat. No. Pin Signal/Wire Color Recommended
Wire Size
mm
2
(AWG)
Strip Length
mm (in.)
Torque Value
N•m (lb•in)
2198-H003-ERS
2198-H008-ERS
2198-H015-ERS
2198-H025-ERS
2198-H040-ERS
Motor power cable
depends on
motor/
drive combination.
0.75…2.5
(18…14) max
8.0 (0.31) 0.5…0.6
(4.4…5.3)
2198-H070-ERS 2.5…6
(14…10) max
Brown
Black
Blue
Green/Yellow
U
V
W
To Next Page
Loading...
