Allen-Bradley SLC 500 Series - Page 683

Publication 1747-RM001G-EN-P - November 2008
Index
Numerics
5/03 processors
passthru examples
15-3
5/04 processors
passthru examples
15-12
5/05 processors
BOOTP configuration
13-31
embedded web server capability 13-35
passthru examples 15-18
A
Absolute (ABS) 4-24
math instruction 4-24
access denied bit B-13
ACK timeout
SLC 5/03, 5/04 or 5/05
13-52
active nodes B-35
Add (ADD) 4-5
math instruction 4-5
addressing
defining for SLC 5/03, 5/04, and 5/05
13-58, 13-66, 13-71
indexed E-10
using mnemonics E-6
addressing modes D-1, D-2
direct addressing D-2
indexed addressing D-2
indexed indirect addressing D-2
indirect addressing D-2
And (AND)
updates to arithmetic status bits
5-20
application specific instructions 7-2
about 7-2
bit shift instructions
overview
7-2
Sequencer Load (SQL)
operation
7-14
Arc Cosine (ACS) 4-29
math instruction 4-29
Arc Sine (ASN) 4-29
math instruction 4-29
Arc Tangent (ATN) 4-30
math instruction 4-30
arithmetic flags B-5
ASCII file 10-3
ASCII Handshake Lines (AHL) 10-13
ASCII instruction 10-13
ASCII instruction error codes 10-24
ASCII instruction status bits 10-5
ASCII instructions
ASCII Handshake Lines (AHL)
10-13
ASCII Read Characters (ARD) 10-15
ASCII Read Line (ARL) 10-17
ASCII String Compare (ASR) 10-19
ASCII Write (AWT) 10-22
ASCII Write with Append (AWA) 10-20
Integer to String (AIC) 10-14
String Concatenate (ACN) 10-11
String Search (ASC) 10-18
timing diagram 10-16
using strings 10-3
ASCII Read Characters (ARD) 10-15
ASCII instruction 10-15
ASCII Read Line (ARL) 10-17
ASCII instruction 10-17
ASCII String Compare (ASR) 10-19
ASCII instruction 10-19
ASCII string manipulation B-25
ASCII timing diagram 10-16
ASCII Write (AWT) 10-22
ASCII instruction 10-22
ASCII Write with Append (AWA) 10-20
ASCII instruction 10-20
in-line indirection 10-21
B
basic instructions 2-2
about 2-2
Examine if Closed (XIC) 2-3
Examine if Open (XIO) 2-3
One-Shot Rising (OSR) 2-5
Output Energize (OTE) 2-4
Output Latch (OTL) 2-4
Output Unlatch (OTU) 2-4
battery low bit B-24
baud rate B-39
SLC 5/03, 5/04, and 5/05 13-51, 13-58,
13-66, 13-71, 13-79
BCC 13-52, 13-58, 13-66, 13-72, 13-80
bit file 1-3, E-3
bit shift instructions E-16
Bit Shift Left (BSL)
operation
7-4
Bit Shift Right (BSR)
operation
7-5
overview 7-2
effects on index register 7-2
Block Transfer
(BTR and BTW)
8-1
Entering Parameters 8-2
Programming Examples 8-8
RIO Block Transfer Overview 8-2
BOOTP