BIBI 850-BL Use and maintenance manual Rev.00
61
The movement consent light on the control panel provides the following information:
ON STEADY: Movement OK up to 6.4 m of work
OFF: Movement not permitted (track in reduced position)
AT
TENTION: If you must drive up a slope, do not change direction when the ground changes from flat to
sl
oping. If this is absolutely necessary, perform the manoeuvre gradually. Follow the instructions in par. 2.7 -
Contro
ls during work.
IT IS FORBI
DDEN to climb on the tracks to attempt any operation that is not allowed or to use the
contr
ols in the basket.
IT IS F
ORBIDDEN to climb on the tracks when the machine is moving.
NO!
To Next Page
